All Power Supplies

Static control power supply EN-C type High Voltage Power Pack. An economical choice for your basic Static Elimination needs. The integrated high voltage converts applied main voltage to approx. 7000 to 8000 volts. The unit is equipped with two or four high voltage terminals and integration On/Off pilot lamp.

The S Line power supply comes with two high voltage connections and meets both North American and European standards.

When you have to know, at a glance, if your Static Eliminator system is working properly. The S Line power supply EN SL LC is the same as the EN SL but with integrated full electronic function monitoring to constantly monitor all functions of the ionizing system.

The S Line EN RLC is identical in all aspects to the EN SL LC plus a signal socket above the earthing sleeve. A fault message can be connected to the signal socket.

Demanded by more critical applications. Special features and advantages: Indication of the output high-voltage by means of an analogue indicating instrument • Fault indication in case of insufficient output voltage by means of an optical signal (light-emitting diode - LED) and a floating changeover contact • Fault indication in case of insufficient mains voltage by means of a floating changeover contact • The floating changeover contact allow both status check and an error check to be performed • The Multistat allows the integration of the fault signals into a quality assurance system.